Fishing The Fly Scotland
Index => Tackle Talk => Topic started by: Terry Coging on 06/03/2018 at 11:01
-
I don't use sinking lines very often but needed a #6 for early season , so when browsing cheap lines at the BFFI show a couple of weeks ago I bought one for a fiver :z6 Worth a punt even if it ends up on the bean poles. When preparing it to put on the reel I noticed that the line was very grooved. My immediate thought was that it was caused by a worn extrusion die. On closer inspection the grooves looked 'engineered'. I googled up grooved fly lines and discovered that ARC use a grooved design claiming less friction when casting? Without experiencing the grooved design I can imagine some problems occurring. I can imagine the grooves collecting dirt and wearing out rod rings. Also, due to the larger surface area a sinker would be slower than the density suggests. I'm only guessing of course :z8 Any comments?
-
Airflo produce a clear ridge intermediate fly line, see the link & watch the accompanying video in the ad.
https://www.fishtec.co.uk/buy.cfm/fly-lines/airflo-ridge-clear-floating-and-intermediate-fly-lines/40/yes/50000
-
I have "grooved" running line on several Pike fly lines (Airflo Snipers). and the issue I get is cut fingers when stripping big flies back.
I also have "textured" lines such as the Orvis Bankshot that make a hell of a noise when casting and "grip" the water making a clean shot difficult when wading (I know, its a Bank shot, so should be use on the bank lol).
I prefer a smooth line myself.