Fishing The Fly Scotland Forum

Rob Brownfield

MacKenzie DTX Perflex
« on: 25/03/2013 at 20:42 »
So, anyone seen/cast one yet?

The price is attracting me and I would like to think Mr Mackenzie is not going to put rubbish on the market. Ben, you must have had a shot of one?

I am looking at a 14 or 15 footer and this is just in my price range if I sell my other kidney.

Hamish Young

Re: MacKenzie DTX Perflex
« Reply #1 on: 25/03/2013 at 21:45 »
Rob I have had the 15' Perflex prototype for two weeks of *ahem* testing. I have had my hands only on the 15' Perflex and a couple of the new single handers from Scott.
To be honest I have not seen the Perflex in fully 'ready to market' specification but what I tested (production blank with DTX 'fittings') pleased me greatly  :z16 It was more than happy with everything I put on it from a Skagit and heavy tips chucking 'big shit' down to wee flies on a floater.
I should have been assessing it more and fishing with it less, but it was so nice to use I sort of.....errrr...... fished with it. A lot.

Definitely a very accomplished all-rounder in my less than skilled hands, I'd say the rod is softer in the tip and in action than my own DTX 'Spey' and the G2 that replaced it. I got some big distances out of it without really trying, felt like second nature and I like that in a Salmon rod.

In that price band I think you'd have a hard job finding something that feels so immediately comfortable, it's like picking up an old friend.
I liked it a lot - obviously :wink I think I can guarantee you will too and (again) in that price range I think it will do very well indeed.

Go buy one Rob :z17

H :cool:

Rob Brownfield

Re: MacKenzie DTX Perflex
« Reply #2 on: 26/03/2013 at 07:52 »
Thanks Hamish, how much commission do you get? ;)

Right, I had better sort out my fishing room and get some stuff sold to make way for it!!

I tried to find some info on them on the MacKenzie website but nothing on it which is frustrating. I am not even sure of the sizes they do yet.

Thanks again.

Hamish Young

Re: MacKenzie DTX Perflex
« Reply #3 on: 26/03/2013 at 08:28 »
Thanks Hamish, how much commission do you get? ;)
Ha - I'll put that idea to Scott :! No, what happens (from time to time) is that Scott lets me play with some of the new toys before they go to market. Let's face it, if a ham-fisted idiot like me is vaguely representative of the market the rods will go to then it makes sense to see if I can break them. I have that reputation - apparently  :shock
Right, I had better sort out my fishing room and get some stuff sold to make way for it!!
Yes.
I tried to find some info on them on the MacKenzie website but nothing on it which is frustrating. I am not even sure of the sizes they do yet.
The Perflex will come as a 13'#8wt, 14'#9wt and 15'#10wt. None in UK stock at the moment which probably explains why they're not up on Scotts website yet, but will be there soon enough :z16

H :cool:

Ben Dixon

Re: MacKenzie DTX Perflex
« Reply #4 on: 26/03/2013 at 09:17 »
Stock expected to be here mid to late April, I have the full range on pre order so as soon as they are available I'll have them on the shelf.

Cheers

Ben

Loxiafan

Re: MacKenzie DTX Perflex
« Reply #5 on: 26/03/2013 at 14:54 »
Is this the one you recommended for me  Ben ? If so will have to pawn a guitar methinks !  :X1

Lindsay

Ben Dixon

Re: MacKenzie DTX Perflex
« Reply #6 on: 26/03/2013 at 16:17 »
It is Lindsay :z4

Loxiafan

Re: MacKenzie DTX Perflex
« Reply #7 on: 26/03/2013 at 23:13 »
It is Lindsay :z4

Cheers dude, I'll see if I can raise the dosh, but will probably be next season so no big rush.

Lindsay

Rob Brownfield

Re: MacKenzie DTX Perflex
« Reply #8 on: 27/03/2013 at 08:26 »
15 footer for me then please :)

Hamish Young

Re: MacKenzie DTX Perflex
« Reply #9 on: 27/03/2013 at 08:59 »
15 footer for me then please :)

I'm sure you'll like it :z16

Marc Fauvet

Re: MacKenzie DTX Perflex
« Reply #10 on: 27/03/2013 at 17:12 »
an approximate price range please ?

Hamish Young

Re: MacKenzie DTX Perflex
« Reply #11 on: 27/03/2013 at 17:47 »
Not gospel as these things can change quickly but I think they'll be on the market from £300 up to around £350 Marc.

H :cool:

Marc Fauvet

Re: MacKenzie DTX Perflex
« Reply #12 on: 28/03/2013 at 06:58 »
targeting the unemployed then. interesting marketing concept !   :z16

 :z4,
marc

Rob Brownfield

Re: MacKenzie DTX Perflex
« Reply #13 on: 28/03/2013 at 07:58 »
Not gospel as these things can change quickly but I think they'll be on the market from £300 up to around £350 Marc.

H :cool:

£289 for 13' #8
£309 for 14' #9
£329 for 15' #10

Sandy Nelson

Re: MacKenzie DTX Perflex
« Reply #14 on: 28/03/2013 at 08:28 »
I notice there are huge reductions on the current DTX's obviously in preparation.

Awesome value at these prices, looks like a good time to buy a Superb Fishing rod.

http://www.fishingmegastore.com/mackenzie-dtx-double-handed-fly-rods~1366.html?&clearance=1

 :z18

Sandy

Hamish Young

Re: MacKenzie DTX Perflex
« Reply #15 on: 28/03/2013 at 09:10 »
I notice there are huge reductions on the current DTX's obviously in preparation.

Not entirely accurate that my colleague, the DTX G2 replaced the original DTX last year, so remaining DTX stock is on a clear down in retailers.
The Perflex is an all new mid-price range and shouldn't be confused with any of the other MacKenzie range.

Awesome value at these prices, looks like a good time to buy a Superb Fishing rod.

Agreed they are absolutely a bargain, fantastic rods at that price.

H :cool:

Rob Brownfield

Re: MacKenzie DTX Perflex
« Reply #16 on: 28/03/2013 at 09:26 »
So, the next question has to be, wait for the Perflex or by the older DTX at a slightly higher price?

Ideally, I would be using it with shooting heads.

Hamish Young

Re: MacKenzie DTX Perflex
« Reply #17 on: 28/03/2013 at 10:04 »
I would wait for the Perflex as it is, after all, new to the market.
But if you see yourself mainly fishing with shooting heads why not buy a MacKenzie shooting head rod :z17 :z16

H :cool:

Rob Brownfield

Re: MacKenzie DTX Perflex
« Reply #18 on: 28/03/2013 at 10:18 »
But if you see yourself mainly fishing with shooting heads why not buy a MacKenzie shooting head rod :z17 :z16

Cost!  :z10

If I did not have a feather bonnet :oops to buy I would go for the DTX Shooting Head rod.

My other option is to go for the 14' 6" version of the Guideline Scandi style rod I already use, but I cannot find one on the market..and they are the same price as the MacKenzie DYX SH anyway.

Ben Dixon

Re: MacKenzie DTX Perflex
« Reply #19 on: 28/03/2013 at 12:22 »
Rob,

There is no stock in the country as yet, to my knowledge they have not even been shipped from the factory yet, they should be here in approx 2 weeks.  I'm not sure that GAC advertising them already has been well received........

The difference between the DTX SH rod and most Guideline rods is that the DTX bends deeper when pushed rather than almost locking up half way down the blank which makes it far more versatile.  Forget the whole "shooting head rod because I fish heads" thing.  Buy a decent rod with a progressive action and it will cast any line you care to put on it. 

Cheers

Ben

Rob Brownfield

Re: MacKenzie DTX Perflex
« Reply #20 on: 28/03/2013 at 13:11 »
The difference between the DTX SH rod and most Guideline rods is that the DTX bends deeper when pushed rather than almost locking up half way down the blank which makes it far more versatile. 

Now thats interesting as I found a piece about my Guideline (Act 4) written by one of Scotts DTX Pro Staff in the US who said Guidelines (Act4 and Exceed) had a nice through action compared to other rods and it was nice to have a rod with a deeper action as they are more versitile :) He seemed to really like the Act 4 12' 6" 8/9 which is the one I have.

I am off to buy a rowing boat and gill net...so much easier!!

Rob Brownfield

Re: MacKenzie DTX Perflex
« Reply #21 on: 28/03/2013 at 13:13 »
I'm not sure that GAC advertising them already has been well received........

Not the only place advertising either. http://www.pmgtackle.com/Double-Handed-Fly-Rods-Switch-Fly-Rods/Mackenzie-DTX-Perflex-Double-Hand-Fly-Rod

This lot are in Ulster.

Ben Dixon

Re: MacKenzie DTX Perflex
« Reply #22 on: 28/03/2013 at 13:34 »
Yes Rob, we are aware of this.  There is no stock, as soon as it lands I will let you know!!  :z4

Do you fly fish for pike Rob?


Cheers

Ben

Mike Barrio

Re: MacKenzie DTX Perflex
« Reply #23 on: 28/03/2013 at 14:07 »
I am off to buy a rowing boat and gill net...so much easier!!

I might have a boat for you if you are serious :wink

Cheers
Mike

Iain Goolager

Re: MacKenzie DTX Perflex
« Reply #24 on: 28/03/2013 at 14:11 »
Quote
Do you fly fish for pike Rob?


It going viral!  :z4

 




Barrio Fly Lines - designed in Scotland - Cast with confidence all over the world

Barrio Fly Lines

Designed in Scotland

Manufactured in the UK

Cast with confidence all over the world

www.flylineshop.com