Fishing The Fly Scotland

Index => Main Discussion Area => Topic started by: Graeme Gauld on 02/10/2008 at 11:04

Title: outboard motor
Post by: Graeme Gauld on 02/10/2008 at 11:04

 :z15  could anybody help i am looking for a new prop for a 3.3 hp johnson that i was given

Title: Re: outboard motor
Post by: Hamish Young on 02/10/2008 at 11:18

Which model of Johnson (yes I know a 3.3 but any other data :?) or more importantly what age is it :?

There are a few suppliers you might try but depending on the age of engine getting parts can sometimes be tricky.

Title: Re: outboard motor
Post by: Graeme Gauld on 02/10/2008 at 11:25

 i dont know the age how ever it looks in great condition i have been told to look for the serial number , where on the engine would i find it ??

Title: Re: outboard motor
Post by: Rob Brownfield on 02/10/2008 at 11:29

Quote from: tango on 02/10/2008 at 11:25

i dont know the age how ever it looks in great condition i have been told to look for the serial number , where on the engine would i find it ??

There should be a wee rivet plate attached to the engine..serial number is on that...

(http://lh3.ggpht.com/_EOjBo_z1e7I/R-P1QL7jN1I/AAAAAAAAAJc/wdwW2s3Mp-o/P3190001.JPG)

Title: Re: outboard motor
Post by: Graeme Gauld on 02/10/2008 at 13:42

the engine is 1998  the serial number is j3ro4cs98

Title: Re: outboard motor
Post by: Rob Brownfield on 02/10/2008 at 16:40

http://www.marineengine.com/manuals/johnson/

Might give you some help :)

http://www.marineengine.com/parts/parts.php for ordering parts :)..although its a yank site, but at least you will get the part number :)

Title: Re: outboard motor
Post by: Jim Eddie on 02/10/2008 at 16:57

Tango

This is a UK site for Johnson parts , I would give them a bell , to see f they could get your prop.

http://www.willsmarine.co.uk/products/johnson/

 :z18

Jim

Title: Re: outboard motor
Post by: Hamish Young on 02/10/2008 at 17:16

Quote from: tango on 02/10/2008 at 11:04

:z15  could anybody help i am looking for a new prop for a 3.3 hp johnson that i was given

Is it a 3 or 2 bladed prop currently :?

Quote from: Jedi on 02/10/2008 at 16:57

Tango

This is a UK site for Johnson parts , I would give them a bell , to see f they could get your prop.

http://www.willsmarine.co.uk/products/johnson/

 :z18

Jim

Excellent bunch of folk, have dealt with them in the past  :z16

You might also try these guys: http://www.caleymarina.com/index.asp although not a Johnson dealer they're usually helpful.

Title: Re: outboard motor
Post by: Graeme Gauld on 03/10/2008 at 10:28

Prop ordered  thanks for the info  :grin :grin